对称翼型近场尾流及后缘边界层流动特性的试验研究

本文简述了用热线风速仪测量“NACA 63-012”对称翼型近场尾流及后缘边界层流动特性,讨论了流场的时均特性及雷诺应力等湍流量的分布特性,提出了无因次速度分布的半经验公式、相关参数及相关曲线解析式,并得出了几点重要结论。     

计算跨声速机翼尾涡流自适应区域方法

本文利用自适应区域方法调节机翼后每个Ｔｒｅｆｆｔｚ平面上的计算域，使得尾涡对这个计算域边界的影响足够小，从而提高了计算的精度和时间。考虑到间断面的影响，在尾涡面上引入有旋项对流场进行计算。椭圆载荷机翼计算表明本文计算结果与经典Ｂｅｔｚ理论一致。用本文方法对某轰炸机进行了计算，计算结果已用于预计其实际飞行的尾涡面。     

高焓风洞中钝体近尾流红外辐射测试技术

介绍在JF-10氢氧爆轰驱动高焓激波风洞中开展再人流场红外辐射测量的实验技术。风洞试验状态的驻室总压为19．6MPa，驻室总温为7920K。实验以球头钝锥体为试验模型，测量其近尾流红外辐射能量通量的横向分布。测量采用插入式锑化铟多元红外成像系统，波段范围为2．27-6．0μm。试验数据呈现明显的规律性。试验结果表明：利用这一测量技术能够提供高焓条件下有较高空间分辨率的、较为准确的红外实验数据。     

直升机吊挂及吊挂物抛放过程建模与分析

建立带吊挂载荷的直升机飞行动力学模型。为计算从悬停转入前飞过程中的过渡飞行段尾迹的畸变和气动干扰特性，旋翼尾迹模型采用非定常有限状态入流理论并添加了尾迹畸变模型；建立了六自由度吊挂体模型，包括多段柔性钢索模型、箱体运动模型以及简化的圆柱形箱体气动力模型等；箱体内弹药发射和抛放过程计入了后座力模型对箱体的反作用。模型程序能模拟弹丸瞬间抛放／发射的过程对直升机操稳特性的影响，并实时记录弹体、箱体和直升机的各项运动参数。     

串列叶栅尾迹特性的实验研究

对串列叶栅的尾迹特性进行了实验研究。研究表明：串列叶栅尾迹平均速度和单列一样满足相似律。串列叶栅的尾迹平均速度和紊流脉动速度沿额线方向比单列叶栅变化平缓。对于串列叶栅在叶栅下游相对距离Ｘ／ＣＴ＞０．７时，尾迹纵向紊流度基本不随距离Ｘ／ＣＴ变化。     

高超声速小钝锥尾流转捩规律与光电特性

显式有限差分方法用于求解小钝锥高超声速化学非平衡尾流的轴对称边界层方程。该方法既适用于层流也适用于湍流。应用 Goldburg 转捩准则确定转捩初始位置。详细地计算了小钝锥尺寸、飞行速度、高度对尾流转捩和光电特性的影响。从计算中得到转捩和光电特性变化的一些有用规律。对湍流亚密部分的雷达散射截面进行了规律性分析。计算结果具有实用参考价值。     

航天飞行中的稀薄气体动力学

飞船、宇航探测器、航天飞机等复杂外形航天器给气体动力学，包括稀薄气体动力学提出了新的要求。本文简要介绍了为计算过渡领域中气动力与热而发展的基于位置元概念的DSMC方法的通用算法。该方法解决了计算物面通量量的技术难点并已用于模拟圆球、飞船、类航天飞机的绕流。正在进行的航天实践，如麦哲伦飞船对金星的探测、行星大气中的气动制动、伽利略飞船的木星之行、尾屏蔽在太空中获得高真空的实验等等提出了新的气动力问题，稀薄气体动力学和DSMC方法是有力的工具。     

A coupling VWM/CFD/CSD method for rotor airload prediction

A coupling fluid-structure method with a combination of viscous wake model(VWM),computational fluid dynamics(CFD) and comprehensive structural dynamics(CSD) modules is developed in this paper for rotor unsteady airload prediction. The hybrid VWM/CFD solver is employed to model the nonlinear aerodynamic phenomena and complicated rotor wake dynamics;the moderate deflection beam theory is implemented to predict the blade structural deformation; the loose coupling strategy based on the ‘delt method' is used to couple the fluid and structure solvers.Several cases of Helishape 7A rotor are performed first to investigate the effect of elastic deformation on airloads. Then, two challenging forward flight conditions of UH-60 A helicopter rotor are investigated, and the simulated results of wake geometry, chordwise pressure distribution and sectional normal force show excellent agreement with available test data; a comparison with traditional CFD/CSD method is also presented to illustrate the efficiency of the developed method.     

多段翼混合边界层改变对流场的影响研究

前缘缝翼尾流与主翼边界层混合的改变对主翼气动力具有重要影响.利用数值模拟手段,通过在前缘缝翼尾缘添加一定动量系数的喷流,改变前缘缝翼尾缘的尾流,进而改变尾流与主翼边界层的混合状况.求解二维多段翼模型30P30N在各个不同喷流条件下的二维非定常流场,结果表明:提高前缘缝翼尾缘喷流的动量系数,将使前缘缝翼尾流和主翼边界层混合开始点后移,提高主翼上表面负压峰值和主翼升力;混合开始点对主翼的负压峰值及升力均有一定的影响;增大来流攻角会抑制前缘缝翼尾流和主翼边界层的混合.     

Dynamic modeling and analysis of vortex filament motion using a novel curve-fitting method

Applications of a novel curve-fitting technique are presented to efficiently predict the motion of the vortex filament, which is trailed from a rigid body such as wings and rotors. The governing equations of the motion, when a Lagrangian approach with the present curve-fitting method is applied, can be transformed into an easily solvable form of the system of nonlinear ordinary differential equations. The applicability of Be′zier curves, B-spline, and Lagrange interpolating polynomials is investigated. Local Lagrange interpolating polynomials with a shift operator are proposed as the best selection for applications, since it provides superior system characteristics with minimum computing time, compared to other methods. In addition, the Gauss quadrature formula with local refinement strategy has been developed for an accurate prediction of the induced velocity computed with the line integration of the Biot–Savart law. Rotary-wing problems including a vortex ring problem are analyzed to show the efficiency, accuracy, and flexibility in the applications of the proposed method.